Question Lemon Processing

Register

rishiagro

Member
We are interested for setting up an plant for Lemon Power in Chhattisgarh , Please guide us
Regards
 
Last edited by a moderator:

garao56

Well-Known Member
It means extracting citric acid and pectin or some other processing , Please inform
 
Last edited by a moderator:

maitys

Senior Member
We are interested for setting up an plant for Lemon Power in Chhattisgarh , Please guide us
Regards
Acid lime or Lemon juice powder was obtained from its juice under optimized conditions by spray drying with 20% Maltodextrin and Gum Arabic ratio of 4:1 Some brands incorporate spray‐dried amla juice with lemon juice as ready‐to‐serve (RTS) drink along with citric acid and glucose. The average amount of lime juice per kg of lime is 621.8 ml or 0.59 kg. and TSS 11.7% Brix , and dry soild yield of Lemon Powder is 28-30 % . If the data seems feasible for a value addition start-up , then you may proceed ....Tentative investment for semi automatic plant and machineries Rs 18-20 lakh
 
Last edited:

garao56

Well-Known Member
If the machinery is about Rs.20 Lakhs you are advised to apply for PMEGP loan ( unit cost Rs.25.00 Lakhs , Subsidy 25% (urban), 35% Rural, Women entrepreneur 35%, by availing bank term loan you can set up the lemon processing unit
 

rishiagro

Member
Acid lime or Lemon juice powder was obtained from its juice under optimized conditions by spray drying with 20% Maltodextrin and Gum Arabic ratio of 4:1 Some brands incorporate spray‐dried amla juice with lemon juice as ready‐to‐serve (RTS) drink along with citric acid and glucose. The average amount of lime juice per kg of lime is 621.8 ml or 0.59 kg. and TSS 11.7% Brix , and dry soild yield of Lemon Powder is 28-30 % . If the data seems feasible for a value addition start-up , then you may proceed ....Tentative investment for semi automatic plant and machineries Rs 18-20 lakh
Dear Sir,
Many many thanks for providing details . How we can get more details and DPR . Please help us

Regards and Best wishes
 
Last edited by a moderator:

garao56

Well-Known Member
Please inform the following :
1.Location of the unit
2.Address of the owners/applicants
3.Details of sheds
4.Details of machinery to be installed
5.method of Process of raw material
6.value of the proposed land site
 
Last edited by a moderator:

Top