Wanted simple dryer for spirulina drying purpose

Register

ureddy

Member
Looking for simple drying equipment which can dry the clay form or noodle form of wet spirulina to avoid sundrying procedure. Suppliers/Dealers in this kind of drying equipment can post their contact number or send in private messages.

Thank you
 

vishwakarma

Well-Known Member
Looking for simple drying equipment which can dry the clay form or noodle form of wet spirulina to avoid sundrying procedure. Suppliers/Dealers in this kind of drying equipment can post their contact number or send in private messages.

Thank you
Hello,

Please send me your contact details.

I have excellent solution, in which the air is heated to the required temp, either from solar and / or other fuel source.

The heated air is used for drying.

Both the flow rate and temp of the air can be controlled and gradient / profile can be programmed.

This is best option to use the thermal energy in the solar radiation / without exposing product to be dried by exposing to direct sunlight.

Regards

MRC
 

Drier for Spirulina

Dear Sir,
We are using both Tubular Solar Drier as well as Fuelwood based Drier to process our horticultural produce like Arecanut, Coconut, Pepper, Cardamom, Nutmug, etc. The cost of constructing Tubular Solar Drier varies between Rs.75/= to Rs.85/= per Sq. Feet. That of the Fuelwood Drier depends upon the quantity of the produce to be dried. If you infom the exact quantity to be dried, then I shall provide the cost of Fuel Wood Drier also.
In any drier, we should see that there is proper ventillation, in addition to heat. Without air-circulation it is difficult to properly dry the agri-produce.
Narayana Hegde
 

arjun6

New Member
dryer for spirulina

Kindly send price of dryer for spirulina

Hello,

Please send me your contact details.

I have excellent solution, in which the air is heated to the required temp, either from solar and / or other fuel source.

The heated air is used for drying.

Both the flow rate and temp of the air can be controlled and gradient / profile can be programmed.

This is best option to use the thermal energy in the solar radiation / without exposing product to be dried by exposing to direct sunlight.

Regards

MRC
 
Last edited by a moderator:

Top