solarfence
Member
Features
The Solar inverter turns on automatically during sunset even if the normal Grid Supply exists and the solar energy stored in the daytime is consumed in the night or as required during power cuts - This will save lot of electricity by consuming the stored solar energy optimally.
Certain predefined amount of energy is reserved to be consumed at the time of power cut.
This portion of the discharged battery can be charged during grid for the required level by tuning the selector switch provided at the back (25%, 50%, 75% and 100%) The remaining portion will be charged only through solar.
Indicators
System minumum cost starts with Rs.47,000.00 ( To generate nearly 1KW power every day)
PRODUCT IS USEFUL WHERE THE LESS ELECTRICITY SOURCE ( LIKE FOREST BELTS, REMOTE AREA LOCATED FARM HOUSES, ESTATES, FREQUENT POWER CUTS)
1. Solar charging :–
a) S/L CHG – displays the solar charging intensity according to the sun light available in multi color flashing. Stops after battery gets fully charged, other indicators displays the battery level in bar mode
2. Label Indicators :-
a) Mains - Shows the mains existence in multi color flashing
b) CHG – Flashes during Grid charging and stops flashing when the battery gets charged to the levels set with the switch provided the back (25%, 50%, 75%, 100%). Always keep in minimum to save electricity. Increase only if necessary during frequent power cuts and cloudy days (Poor sunlight) .
c) O/L – This indicates with a beep sound for 30 sec when the system is overloaded and turns “ off ” the system, automatically turns “on” when the load is reduced.
d) L/B – This indicates with a beep sound for 30 sec when the battery is LOW and turns “ off ” the system, automatically. Please switch off the inverter and wait till the battery gets charged.
Note : do not compare this system with your electricity charges. not with regular invertors,
for details contact : 0 9620071599
or email : solarservice09@gmail.com
The Solar inverter turns on automatically during sunset even if the normal Grid Supply exists and the solar energy stored in the daytime is consumed in the night or as required during power cuts - This will save lot of electricity by consuming the stored solar energy optimally.
Certain predefined amount of energy is reserved to be consumed at the time of power cut.
This portion of the discharged battery can be charged during grid for the required level by tuning the selector switch provided at the back (25%, 50%, 75% and 100%) The remaining portion will be charged only through solar.
Indicators
System minumum cost starts with Rs.47,000.00 ( To generate nearly 1KW power every day)
PRODUCT IS USEFUL WHERE THE LESS ELECTRICITY SOURCE ( LIKE FOREST BELTS, REMOTE AREA LOCATED FARM HOUSES, ESTATES, FREQUENT POWER CUTS)
1. Solar charging :–
a) S/L CHG – displays the solar charging intensity according to the sun light available in multi color flashing. Stops after battery gets fully charged, other indicators displays the battery level in bar mode
2. Label Indicators :-
a) Mains - Shows the mains existence in multi color flashing
b) CHG – Flashes during Grid charging and stops flashing when the battery gets charged to the levels set with the switch provided the back (25%, 50%, 75%, 100%). Always keep in minimum to save electricity. Increase only if necessary during frequent power cuts and cloudy days (Poor sunlight) .
c) O/L – This indicates with a beep sound for 30 sec when the system is overloaded and turns “ off ” the system, automatically turns “on” when the load is reduced.
d) L/B – This indicates with a beep sound for 30 sec when the battery is LOW and turns “ off ” the system, automatically. Please switch off the inverter and wait till the battery gets charged.
Note : do not compare this system with your electricity charges. not with regular invertors,
for details contact : 0 9620071599
or email : solarservice09@gmail.com
Last edited: