Namibia OIL REFINING MACHINE screening and sifter discussion:
Namibia OIL REFINING MACHINE screening and sifter discussion: Sifter is the important component for the Oil Refining Machine screening device. In actual production, one layer of sifter screening always cannot meet the technological requirement. Multi-layers of sifters screening is necessary. Therefore, the combination methods of Oil Refining Machine sifter plays an important role in screening process. The sifter combination methods are divided into oversize product method, undersize product and mixing method.
Namibia OIL REFINING MACHINE screening and sifter discussion: Oversize product method: after continuous screening of the oversize product, we can get different undersize product. The small and large screen mesh size can classify the material into different granularity.
Undersize product method: after continuous screening of the undersize product, we can get oversize product with different granularity. In the same way, the small and large screen mesh size can classify the material into different granularity.
Mixing method: mixing method can mix the oversize products method and the undersize product method together and make the screen mesh have crossed allocation. The mixing method concludes the front two methods and is quite smart and can meet various screening equipment requirements. It is usually used in grain hulling and end products processing.
Namibia OIL REFINING MACHINE screening and sifter discussion: Oil Refining Machine operation requirements and attentions
1. Without operation training, the staff cannot operate or check Oil Refining Machine.
2. The surrounding place of the Oil Refining Machine should keep clean and unblocked.
3. During Oil Refining Machine operation, we should wear the working clothes and wear safety hat and safety shoes.
4. The equipment installation should have ground lead.
5. Don’t touch any running part of the machine during the machine running.
6. Don’t make water inflow in the machine to cause short circuit.
7. Cut off the electric supply during machinery checking. Make a mark for the machine.
8. Check the machine and abide by the maintenance procedures. After checking, we should count the tools quantity.
9. Check whether the bolts, screws and gasket are damaged.
10. Add oil to the transmission part under the machine halting cases.
11. The back cover plate is covered in the Oil Refining Machine operation. Don’t try to open ay cover in operation.
Edible Oil Refining Plant, Oil Refining Machine
Namibia OIL REFINING MACHINE screening and sifter discussion: Sifter is the important component for the Oil Refining Machine screening device. In actual production, one layer of sifter screening always cannot meet the technological requirement. Multi-layers of sifters screening is necessary. Therefore, the combination methods of Oil Refining Machine sifter plays an important role in screening process. The sifter combination methods are divided into oversize product method, undersize product and mixing method.
Namibia OIL REFINING MACHINE screening and sifter discussion: Oversize product method: after continuous screening of the oversize product, we can get different undersize product. The small and large screen mesh size can classify the material into different granularity.
Undersize product method: after continuous screening of the undersize product, we can get oversize product with different granularity. In the same way, the small and large screen mesh size can classify the material into different granularity.
Mixing method: mixing method can mix the oversize products method and the undersize product method together and make the screen mesh have crossed allocation. The mixing method concludes the front two methods and is quite smart and can meet various screening equipment requirements. It is usually used in grain hulling and end products processing.
Namibia OIL REFINING MACHINE screening and sifter discussion: Oil Refining Machine operation requirements and attentions
1. Without operation training, the staff cannot operate or check Oil Refining Machine.
2. The surrounding place of the Oil Refining Machine should keep clean and unblocked.
3. During Oil Refining Machine operation, we should wear the working clothes and wear safety hat and safety shoes.
4. The equipment installation should have ground lead.
5. Don’t touch any running part of the machine during the machine running.
6. Don’t make water inflow in the machine to cause short circuit.
7. Cut off the electric supply during machinery checking. Make a mark for the machine.
8. Check the machine and abide by the maintenance procedures. After checking, we should count the tools quantity.
9. Check whether the bolts, screws and gasket are damaged.
10. Add oil to the transmission part under the machine halting cases.
11. The back cover plate is covered in the Oil Refining Machine operation. Don’t try to open ay cover in operation.
Edible Oil Refining Plant, Oil Refining Machine