Lybia OIL EXTRACTION PLANT condition and requirements analyzation:
Lybia OIL EXTRACTION PLANT condition and requirements analyzation: Soybean Oil Extraction Plant requirements for extraction material,steam,water,electricity etc:
1,moisture of extraction material :5-8%;
2,Temperature of extraction material: 50-55°C;
3,oil content of extraction material: 14-18%;
4,thickness of extraction cake: ≤ 13mm;
5,Powder degree of extraction material: ≤ 15% (30 meshes);
6,steam:: ≥ 0.6Mpa;
7.solvent: national standard No.6 solvent oil;
8. Power electricity: 50HZ 3*380V ;lighting electricity:50HZ 220V ;
9. Oil Extraction Plant Temperature of supplement water: ≤ 25 °C hardness: ≤ 10;
10. Oil Extraction Plant Volume of supplement water: 1-2 m3 / t raw material;
11. Oil Extraction Plant Temperature of recycle water: ≤ 32 °C.
Lybia OIL EXTRACTION PLANT condition and requirements analyzation: Any change of Oil Extraction Plant technical parameters, there is no further notice.
Lybia OIL EXTRACTION PLANT condition and requirements analyzation: Sunflower Oil Extraction Plant main section:
1. Oil Extraction Plant Extractor: in the extractor, spraying the solvent to the oil material flake and dissolve the oil
fats. Then get the wet meal also the mixture of oil and solvent.
2. Oil Extraction Plant Solvent pump: spraying the solvent to the oil material continuously.
3. Oil Extraction Plant DTDC: separating the solvent from the wet meal.
4. Oil Extraction Plant Evaporator: separating the solvent from the mixed oil to get the crude oil and recycling
the solvent.
5. Oil Extraction Plant Stripper: evaporating the rest solvent in the oil.
6. Oil Extraction Plant Condenser: cooling the solvent from gas to liquid for recycling.
Lybia OIL EXTRACTION PLANT condition and requirements analyzation: Sunflower Oil Extraction Plant main process:
(1) The Oil Extraction Plant material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
Lybia OIL EXTRACTION PLANT condition and requirements analyzation.
Oil Extraction Plant
Lybia OIL EXTRACTION PLANT condition and requirements analyzation: Soybean Oil Extraction Plant requirements for extraction material,steam,water,electricity etc:
1,moisture of extraction material :5-8%;
2,Temperature of extraction material: 50-55°C;
3,oil content of extraction material: 14-18%;
4,thickness of extraction cake: ≤ 13mm;
5,Powder degree of extraction material: ≤ 15% (30 meshes);
6,steam:: ≥ 0.6Mpa;
7.solvent: national standard No.6 solvent oil;
8. Power electricity: 50HZ 3*380V ;lighting electricity:50HZ 220V ;
9. Oil Extraction Plant Temperature of supplement water: ≤ 25 °C hardness: ≤ 10;
10. Oil Extraction Plant Volume of supplement water: 1-2 m3 / t raw material;
11. Oil Extraction Plant Temperature of recycle water: ≤ 32 °C.
Lybia OIL EXTRACTION PLANT condition and requirements analyzation: Any change of Oil Extraction Plant technical parameters, there is no further notice.
Lybia OIL EXTRACTION PLANT condition and requirements analyzation: Sunflower Oil Extraction Plant main section:
1. Oil Extraction Plant Extractor: in the extractor, spraying the solvent to the oil material flake and dissolve the oil
fats. Then get the wet meal also the mixture of oil and solvent.
2. Oil Extraction Plant Solvent pump: spraying the solvent to the oil material continuously.
3. Oil Extraction Plant DTDC: separating the solvent from the wet meal.
4. Oil Extraction Plant Evaporator: separating the solvent from the mixed oil to get the crude oil and recycling
the solvent.
5. Oil Extraction Plant Stripper: evaporating the rest solvent in the oil.
6. Oil Extraction Plant Condenser: cooling the solvent from gas to liquid for recycling.
Lybia OIL EXTRACTION PLANT condition and requirements analyzation: Sunflower Oil Extraction Plant main process:
(1) The Oil Extraction Plant material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
Lybia OIL EXTRACTION PLANT condition and requirements analyzation.
Oil Extraction Plant