Introduction to Fote Ring Die Wood Sawdust Pellet Mill
1)The pellets made by our company have high density and high combustion value. The pellet specifications can be adjusted at will through changing dies. The wood pellets have smooth surface, suitable density and higher curing degree.
2)Before pressing the pellets,the raw materials should be powder with 15%-20% moisture,if you can't make raw materials into powder,we can also supply the hammer grinding machine to crush it.
3)Normally the wood pellet diameters of 6mm and 8mm are best popular in the international market,if you need other diameters,please inform us in advance so that we would design for you.
4)About the machine color,it idepends on the customer selection;we will paint the color according to your requirments after producing the machine without painting.so please notify us early.
5)If your raw materials are hard with lower adhesiveness,please mix some soft raw materials in so that they could be easy to hold together when the machine is working, and pellets will be easy to press out.
Working Methods of Wood Sawdust Pellet Mill
The raw material is under dried condition, which is compressed, and formed into small eraser-sized bits, the final pellets is clean, pleasant and smooth, and its density is more than1.0 G/M3.
How do you ensure the quality of Sawdust Pellet Mill
We have ISO and CE certificates, so all our machines and accessories are produced with standard specifications. We are factory direct sales, quality and sales service are most important factors for us, to establish long-term trade relations with customers. We can ensure each machine quality from the sheetmetal to screws material, also it must be test machine successful before send to our customers.
Sawdust Pellet Mill/Sawdust Pellet Production Line/China Sawdust Pellet Machine Supplier
1)The pellets made by our company have high density and high combustion value. The pellet specifications can be adjusted at will through changing dies. The wood pellets have smooth surface, suitable density and higher curing degree.
2)Before pressing the pellets,the raw materials should be powder with 15%-20% moisture,if you can't make raw materials into powder,we can also supply the hammer grinding machine to crush it.
3)Normally the wood pellet diameters of 6mm and 8mm are best popular in the international market,if you need other diameters,please inform us in advance so that we would design for you.
4)About the machine color,it idepends on the customer selection;we will paint the color according to your requirments after producing the machine without painting.so please notify us early.
5)If your raw materials are hard with lower adhesiveness,please mix some soft raw materials in so that they could be easy to hold together when the machine is working, and pellets will be easy to press out.
Email:
Working Methods of Wood Sawdust Pellet Mill
The raw material is under dried condition, which is compressed, and formed into small eraser-sized bits, the final pellets is clean, pleasant and smooth, and its density is more than1.0 G/M3.
How do you ensure the quality of Sawdust Pellet Mill
We have ISO and CE certificates, so all our machines and accessories are produced with standard specifications. We are factory direct sales, quality and sales service are most important factors for us, to establish long-term trade relations with customers. We can ensure each machine quality from the sheetmetal to screws material, also it must be test machine successful before send to our customers.
Email:
Sawdust Pellet Mill/Sawdust Pellet Production Line/China Sawdust Pellet Machine Supplier