bigbiggirl
Active Member
At the feeding mouth and discharging mouth of wood chip dryer, devices for feeding work and discharging work are respectively installed. Feeding device is for delivering raw materials into the drum for high-efficient drying. As long as feeding work is nothing wrong, you can elevate the tremie pipe as high as possible. Meanwhile, you should notice the angle of feeding pipe.
The elevated tremie pipe should not contact with the tail ring of wood chip dryer. To prevent the tail ring and drum from being burned out, you should keep the length of tremie pipe in drum. Appropriate elevation of tremie pipe can make hot air flow smoothly in drum and protect it from being burned out.
To slow the running speed of raw materials in thermal belt, fully absorb the heat energy, improve the heat-transfer efficiency and protect the drum and tail ring from being burned out, Fote technicians change the spiral blades at feeding mouth with triangle plate. The height of short cathetus is similar with that of tail ring at feeding mouth. What’s more, the short cathetus is firmly melded on.
Nobody is perfect. And it is similar for wood chip dryer. Besides, it is man-made. Even though the wood chip dryer is made by the NO.1 supplier around the world, it still can have failures since there are a lot of uncontrollable factors. Then, here comes the after-sales service. Our bosses always emphasizes on the quality and after-sales service in any meeting. Yeah, that’s why Fote has made the production for 30 years and still run faster than other suppliers.
Fote Heavy Machinery: [url]http://www.ft-dryer.com/products/Industrial-dryer.html[/url]
Fote Official Website: vip@sinoftm.com
The elevated tremie pipe should not contact with the tail ring of wood chip dryer. To prevent the tail ring and drum from being burned out, you should keep the length of tremie pipe in drum. Appropriate elevation of tremie pipe can make hot air flow smoothly in drum and protect it from being burned out.
To slow the running speed of raw materials in thermal belt, fully absorb the heat energy, improve the heat-transfer efficiency and protect the drum and tail ring from being burned out, Fote technicians change the spiral blades at feeding mouth with triangle plate. The height of short cathetus is similar with that of tail ring at feeding mouth. What’s more, the short cathetus is firmly melded on.
Nobody is perfect. And it is similar for wood chip dryer. Besides, it is man-made. Even though the wood chip dryer is made by the NO.1 supplier around the world, it still can have failures since there are a lot of uncontrollable factors. Then, here comes the after-sales service. Our bosses always emphasizes on the quality and after-sales service in any meeting. Yeah, that’s why Fote has made the production for 30 years and still run faster than other suppliers.
Fote Heavy Machinery: [url]http://www.ft-dryer.com/products/Industrial-dryer.html[/url]
Fote Official Website: vip@sinoftm.com